Testomat service and maintenance
Maintenance intervals for Testomat
Regular maintenance is required to ensure the proper functioning of Testomat instruments.
The measuring chamber and its condition are of elementary importance for photometric measurement.
During regular operation, a visual inspection of the measuring chamber and the hydraulic and electrical connections is sufficient. The frequency of the inspection should take into account the area of application and the associated quality of the water to be analyzed.
The following intervals for the visual inspection and the replacement of components are recommendations and must be adapted to the operating conditions and the condition of the device if necessary.
| Maintenance | 1/4 yearly | 1/2 yearly | yearly | 2-yearly |
| Cleaning viewing panels | X | |||
| Clean measuring chamber | X | |||
| Cleaning the water drain | X | |||
| Check electrical & hydraulic connections | X | |||
| Replace gaskets & sight glasses | X | |||
| Clean candle filter (if used) | X | |||
| Change suction lance for indicators/reagents | X | |||
| *1 Change micro valves & seal of DosiClip | X | |||
| *1 Change DosiClip suction/pressure hose | X | |||
| *2 Change pump head | After 150 net operating hours of the pump head | |||
| *2 Change engine block | Recommendation: Change together with pump head | |||
*1: applies to Testomat 2000/ Eco/ EVO with DosiClip
*2: applies to Testomat 808 series
Specially assembled service kits are available for all device variants and for the most important components, such as the water inlet or the measuring chamber. The contents of the service kits have been adapted to the actual requirements of the work to be carried out and contain all the necessary components.
In addition, you will find step-by-step instructions for all activities in our service and maintenance manuals.
Service manuals can be found in the download area
- Service manual Testomat 808
- Service manual Testomat 2000/Eco
- Service manual Testomat EVO
- Service manual Testomat LAB
If you have any questions or need our support you can reach our service department at:
Tel.: +49 (0) 5121 7609-85
Mail: services@heylneomeris.de
or use the contact form.
Maintenance request
Service and maintenance are important components for ensuring plant availability in your company. Through our service partner network, we ensure competent support for our measurement & associated plant technology and carry out the necessary work directly on site.
Send us a short message and you will receive a free quote.
E-Mail: vertrieb@heylneomeris.de
For our customers, we regularly offer practical training courses that are specifically geared to the topics of maintenance, servicing and process integration of our measuring instruments. Please inform yourself about our current training dates. We look forward to welcoming you as our guest.