Water treatment plant for outpatient clinics with lifting unit
Product number: 896523
25.922,60 €*
* Prices excl. VAT plus shipping costs.
![Water treatment plant for outpatient clinics with lifting unit](https://www.heylneomeris.shop/media/01/0e/a3/1685608373/Wasseraufbereitungsanlage ambulante Kliniken.jpg?ts=1714059824)
Product information
Dimensions: 16000 x 800 x 18000 mm
Weight: 100,000 kg
Description
Description "Water treatment plant for outpatient clinics with lifting unit"
The modular water treatment system was specially developed for the outpatient care sector. While
the overall geometry, the system can be adapted to the different degrees of water hardness in Germany, the
the quantities required in different outpatient centers, as well as to the initial water quality, including any treatment
treatment steps on the part of the supplier. The modularity offers the decisive advantage
that the overall concept can be adapted to the respective water type or composition as well as the supplier's treatment processes.
Principle
Due to its modular design, the water treatment system can be adapted to the different conditions in outpatient care.
to the different conditions in the outpatient care sector.
be adapted. These include different degrees of water hardness,
quantities required in outpatient centers, the initial water quality
and the treatment steps. Optimum water treatment is
relevant for the reliable availability of instruments for
for operations. It also goes hand in hand with the protection of
and equipment technology. Furthermore, any damage to the
damage to the instruments or equipment is always directly
directly related to the issue of patient safety. For the
pre-filtration, a softening system and a reverse osmosis system with a 100 liter permeate
a reverse osmosis system with a 100 liter permeate tank
including surge tank and sterile filter as well as permanent conductivity and silicate
silicate monitoring using a Testomat® 808 SiO2 on the blending bed
and recirculation system with integrated UV system and pyrogen filter
Cut-off via system separator
To protect the drinking water network from contamination by treated water or changes in the natural composition of the water, the system separator is also used.
water or changes in the natural composition of the
of the drinking water fed into the system due to the technical treatment
the installation of a system separator is mandatory.
The system has an integrated system separator (type BA),
which is located directly behind the Aqua-Stop of the water connection.
Rittal enclosure systems
The system components are installed in two Rittal enclosures. Rittal
is a leading manufacturer of enclosure systems and offers a wide range of
range of solutions for the secure storage and protection of electronic
electronic components and devices. Rittal enclosure systems are
available in various sizes, designs and configurations
and configurations and are suitable for various application areas such as IT infrastructure
industrial automation, power distribution and telecommunications.
Rittal enclosure systems are characterized by high quality, functionality and flexibility.
and flexibility. Rittal enclosures are made from high-quality
materials and offer a robust construction that provides reliable protection
reliable protection for the equipment inside.
They are protected against dust, dirt, moisture, vibrations and other environmental
environmental influences. Rittal enclosure systems are modular
which means that they can be adapted to the specific requirements
and the available space. They offer a
variety of options for mounting accessories such as shelves,
cable management, climate control units and power distribution units.
The enclosure systems from Rittal offer various security features
such as lockable doors, security locks and access control systems,
to prevent unauthorized access to the equipment and ensure data security.
data security. For the installation of the modular water treatment plant
from HeylNeomeris only requires a minimum footprint of
footprint of 1.60m x 1m is required. It consists of 2 cabinets that are
80cm wide and 60cm deep. It is possible to work with
double-wing doors and thus, due to the depth of 60cm and a double
of 60cm and a double wing door with a dimension of 40cm, this results in a
The cabinets used are made from sturdy sheet steel modules and have a high-quality surface coating.
and have a high-quality surface coating.
Standard equipment of the system
Testomat® 808 SiO2 silicate measuring device
A Testomat® 808 SiO2 silicate measuring device is used for continuous silicate monitoring.
SiO2 silicate is used. The Testomat®808 SiO2 is a measuring device,
which is used to determine the silicate content in water. The
measuring principle of the Testomat®808 SiO2 is based on the so-called
molybdenum blue method. The silicate in the water reacts with
a reagent solution containing molybdenum. This reaction produces
a blue color whose intensity is proportional to the silicate content.
The measuring device records the color intensity using an optical sensor
and converts it into a measured value that represents the silicate content of the water.
of the water. The Testomat®808 SiO2 is housed in a compact casing
which contains a user interface, display and control elements as well as
and connections for water samples and drainage.
The use of Testomat 808®SiO2 ensures reliable compliance with the requirements of the DGSV and AKSV.
compliance with the limit value for SiO2 recommended by the DGSV and AKI of
of 0.4 mg/l is ensured.
If the limit value is exceeded, it is possible to report this to the optionally available
to the optionally available NeoTecMaster® or directly to an optical warning
directly to an optical warning element.
Continuous monitoring of the silicate content is required,
deposits and any resulting damage to equipment and instruments.
damage to device technology and instruments effectively.
By using the Testomat®808 SiO2, companies can continuously monitor the silicate
continuously monitor the silicate content and, if necessary, take appropriate measures to prevent deposits.
Lifting system
The lifting system is used to reliably discharge the wastewater volumes from the individual process steps. The main volume flows here are the wastewater from the regeneration of the softening system and the concentrate from reverse osmosis. The discontinuous wastewater flows from the silicate measuring device, the system separator and the rinsing water that occurs when the input filters (especially activated carbon filters) are changed are also collected in the lifting unit.
Optional components of the system
- UV disinfection Mini
- Pyrogen filter
- NeoTecMaster® 5 inch with housing
- Viewing window
- Lighting
- Aqua-Stop (solenoid valve shut-off)
- Collection tray